Free Fumigation Plywood Packaging Steel Base Manufacturers

Today, the editor will tell you what are the precautions when designing SCENIX compressed wood pallets. Interested friends can take a look with the editor!

The raw materials are sliced and crushed into a certain length of wood chips, which are then dried in a dryer to remove excess moisture. After drying, the wood chips are added with glue and thoroughly mixed with it. The mixed material can be filled into the mold for hot pressing. After hot pressing, the molded tray can be taken out.

For the logistics industry, green logistics is a topic worthy of attention.

The main processing methods to prevent mildew on wooden pallets in the industry at present。

Appearance acceptance criteria: 1. The pallet material is made of multi-layer wooden glued fumigation material; 2. The surface of the pallet tiles is smooth, without cracks and deformations that affect use, and all materials should not have defects such as rot, insect infestation; 3. All The processing of the wood should be square and without bevels; 4. The iron nails used for the pallet should be firmly and vertically nailed into the supporting wood, so that the pallet structure is solid; 5. There should be no less than 4 iron nails at the joints of the four corner pads of the pallet, and at least 4 iron nails at the connection of the inner pads. There should be no less than 3 iron staples; 6. There should be no missing nails, crooked nails, or oblique nails on the pallet, and the nail tips and nail heads should not be exposed;

Compression molding refers to hot press molding: mainly for thermoplastic materials (sheets), using a hot press molding machine, and blister molding I think it should also be a branch of hot press molding, which uses vacuum or high-pressure gas assistance.Pressed wood Pallet is your good choice.